
Add a temperature/humidity sensor with 24-hour fan-aspirated
radiation shield to your Vantage Pro2 system. Use with the
Anemometer/Sensor Transmitter Kit for flexibility in siting
options.
Add flexibility in siting options
Site a temperature/humidity sensor where you want it, even if
that location is not ideal for the transmitter, such as within an
orchard’s canopy. This sensor comes with a 25 foot (7.6 meter)
cable which allows you to plug it into an Anemometer/Sensor
Transmitter Kit mounted separately from the sensor.
Features both temperature and humidity sensors inside a 24-Hour
Fan-Aspirated Radiation Shield. The fan constantly draws air in
over the sensor giving you highly accurate temperature readings
even during steep temperature changes such dusk or dawn. The shield
protects the sensors from solar radiation and other sources of
radiated and reflected heat.
Perfect for installations where steep temperature gradients are
common and where winds are low. If your installation does not have
steep temperature gradients or low wind, consider the
Temperature/Humidity Sensor with passive radiation shield.
Accurate, high performance sensors
The temperature sensor’s accuracy is +/-0.5 degreesF (+/-0,3
degreesC) from -40 degrees to 150 degreesF (-40 degrees to 65
degreesC). The humidity sensor’s accuracy is +/-2%. Data updates
every 10 seconds.
Powerful 24-hour fan
Fan provides aspiration rate of 190 feet/minute in full sun. On
battery only, aspiration rate is 80 feet/minute. Supercapacitor and
back-up batteries keep fan running 24 hours a day.
Requires
Requires a transmitter station, such as the Anemometer/Sensor
Transmitter Kit, and a receiver, such as a wireless Vantage Pro2
console, Vantage Connect or Weather Envoy.
What’s in the box:
- Motor-driven fan with solar panel and back-up batteries for 24
hour power. - Temperature and humidity sensors with a 25 foot (7,6 meter)
cable. - Hardware for mounting on a fence post or pole
Product Data Sheet






Reviews
There are no reviews yet.